SUMMARY:

• Seeking opportunity for Supervisor/Field Engineer/Inspector where I can apply my Almost 15 years working in oil and gas Steel fabrication and Erection works as Supervisor, Field Engineer
• I gained more experience in many design of project which is made an advantage and benefit for my knowledge. Specialized in supervise construction and erection worker, and expert in welding inspection scope as qualified CSWIP 3.1 Welding Inspector. Getting a hand in verified and perform Pre - commissioning work and the entire mechanical/Piping test. Dedicated to my work and perform multi-discipline jobs.
• Have sufficient and well-defined responsibility, qualifications to identify quality problems and areas of non-conformance and to initiate, recommend and substantiate corrective action. I am a highly motivated and result-oriented professional with exceptional leadership and inter-personal skills with an extensive background in construction industry and management of quality, safety, value and timeliness of project execution.

PROFESSIONAL EXPERIENCE:

Construction supervisor

Confidential

Responsibilities:

• Acting as Authorize Approval Representative (AAR) for Permit To Work (PTW) for opening and closed out permit.
• Comprehend of safety policies and procedures as well as performs assigned duties in a safe manner to set example for subcontractor while managing them, take responsibility for their safety and ensures that they comply with established safety policies and procedures and practice safe work habits.
• Responsible as Person in Charge for the timely hand over between disciplines to discipline.
• Comprehend the requirements of the contract structural fabrication & erection Scope of Works inclusive of all aspects of fabrication, assembly, modification, welding, coatings, and schedule and look ahead plans. Ensures work is in conformance with plans, specifications, schedules, and cost control estimates.
• Ensure Contractor complies with construction methods, lifting procedures and method statements for the most expedient approach.
• Interfaces with Quality and Engineering Teams to insure all work scopes complies with project requirements / specifications, any corrections, additions, re-work identified by Quality or Engineering been performed accordingly. Support final walkdown process by assist and killing punch list / carry over work packs as required.
• Establish daily contact with Sub-Contractor supervision/Management team.
• Monitor and reports work activities and manpower requirements / resources to meet completion dates, monitors craft personnel levels, material and equipment needed to meet schedules. Comprehend progress targets and closely monitor progress.
• Prepares and issues daily & weekly / monthly progress/weather/manpower reports as required.
• Support and participate all HSSE Activities / Initiatives inclusive of Injury and Incident Free (IIF) initiatives, Behavior Based Observation (BBO) programs, Safety Walkdown, Management Walkdown and Toolbox meeting.
• Prepare, locate and organize laydown area for project material arrival, segregation, mark and cut activity and material inspection process.
• Prepare and provide temporary consumable store, equipment store, lifting equipment store area at job site.
• Prepare and ensure all equipment will use for fabrication are calibrated, serviced and able to function before the job start. To ensure calibration cert and sticker is displayed and spotted.
• Ensure the machinery crane, forklift, excavator, lorry and other mobile vehicle sent to inspection, registered to project, approved from Facilities and HSE department.
• Provide and guide the contractor for planning activity of the day, planning for next day.
• To ensure only qualified person will be on the job, such as qualified welder, trained grinder, competence scaffolder, and skilled worker for they trade job.
• Approved material requisition base on Method of Statement, planning and erection sequence
• Brief to all workers about safety and plan of the day in Toolbox Meeting every morning
• Assist subcontractor Management team in assign and coordinate work to construction worker, based on planning schedule, material and requirements.
• Assist contractor by distribute and tracking the drawing, changes and revision from engineering
• Analyze on progress problems and recommend solutions, such as improving progress methods, quality or plan.
• Coordinate/interface work activities with other construction project activities.
• Train craft in construction methods, operation of equipment, safety procedures, or company policies.
• Assist and coordinate with scaffolding subcontractor for the required or additional platform
• Planning and measure the route of Mobile crane, crawler crane and forklift before beginning the erection of module at site to avoid clash or blocked of access.
• Control DC check before and after welding.
• To ensure all NDT requirement have been performed and accepted. Track and compile copy of NDT Summary and record for future use.
• Ensure rigging procedure and sequence has been approved before lifting activity.
• Walk with inspector, contractor QA/QC, Contractor supervisor and foreman for punch list identification activity and killing process after that.

Construction supervisor (civil)

Confidential

Responsibilities:

• Underground Scanning for general utilities such as electrical cable, underground piping & sewer. Using two type of scanning either Ground Penetration Radio & Radio Detection for Perimeter.
• Topography survey. Locate location for Soil Investigation for CPT (Cone Penetration Test) & BH (Bore Hole), detailing underground general utilities by total station
• Soil Investigation using two method CPT & BH based on marked up drawing provided.
• Prepare and provide the Daily Progress report to Project Management Team
• Act as Receiving Authority for PTW issuance, receiving and close out, in compliance with PP (M) SB HSE requirement.

Structural field engineer

Confidential

Responsibilities:

• Coordinate with engineering on constructability and design issues relating to the structural discipline such as steel erection & fabrication
• Establish a field engineering working relationship and lines of communication with the Resident Engineer, including agreement on civil engineering deliverables and overall construction application configuration management.
• Responsible for quantity take-off, control, tracking, reporting and forecasting
• Specify the project criteria for construction of temporary construction facilities as required.
• Coordinate with the Procurement Organization for field procured materials, material substitution, services and equipment such additional material, additional bolts and nuts, additional plate.
• Review material receiving reports and warehousing to assure delivery of correct materials.
• Coordinate and monitor the interfaces for data exchange to support the construction automation plan and the project controls program requirements at the jobsite.
• Develop and manage the construction quality program such as People Base Quality program (PBQ), Inspection.
• Direct preparation of estimates construction activities and coordinate the preparation of reports, forecast and progress reports.
• Coordinate with Field Supervision and Subcontractors to plan/support construction schedules.
• Plan and recommend procedures to be implemented by Field Supervision to ensure construction operations are within requirements of engineering design, Human Factor Design (HFE) and specifications.
• Work with Chevron resident engineering, field engineer and operation personnel to coordinate construction activities.
• Coordinate subcontract activities to ensure materials, equipment and quality comply with design plans and specifications.
• Implement controls over variables affecting of erection and fabrication job progress. Also ensure engineering and procurement provide timely delivery of drawings, materials and equipment and that other corporate programs are fully utilized.
• Perform other duties as required by Bechtel management
• Implement the project Constructability Program at the construction site
• Provide input to the Site Manager on employee or craft performance ratings by TeamWorks reporting
• Ensure that heavy lift rigging plans are prepared as required
• Provide scope definition and technical data for field to the contractor
• Provide technical data for a system/area turnover program including applicable requirements for the development of "as built" documents and turnover of inspection records required by the contract
• Provide technical review of vendor submittals as required
• Raised FCD (Field Change Document) and NCR (Non Conformance Record) for any clashing, error, mistake or un-constructible issue.
• Counter Check and verified shop drawing with Tekla to ensure there is no obstruction for construction work.
• Determine estimated man-hours needed, craft needed, tool needed and estimated item such as scrapped material, repair material, for rework due to Design Change Notice (DCN) or any un-constructible issue.
• Verified and review Dimensional Control report.
• Implement all of scope and requirement in .
• Working closely with superintendent, construction for the final Human Factor Engineering (HFE)/Safety in Design (SID) acceptance. This required changes of design, additional support, clashing with other discipline HFE/SID factor in field.
• Final check for fireproofing area.
• Continued and closely inspection for:
• Prepare the module erection foundation by installing new concrete slab.
• Lead the final walkdown with client inspection team, which is, consist Sub-Contractor QC Inspector, Sun-Contractor Structural Engineer, Sub-Contractor Superintendent and Bechtel Superintendent to prepare the module for final inspection to ensure it is ready.
• To ensure the module is ready for final inspection joint by joint. 100% inspection.
• To ensure all the NDT requirement for joint has completed such as UT, MPI and RI
• Prepare and submit release note and all signed inspection document to Module Turn Over team.
• Preparation of Final Documentation
• Organized ship loose item from tracking, preparation, labelling, inspection & mobilization until returned to warehouse for final shipment activity
• Conduct People Based Quality (PBQ) awareness for craft worker (sub-contractor) covering of

Confidential

Responsibilities:

• Ensure compliance with Company’s HSE regulations while on site for installation, testing and commissioning of GRE piping system.
• Inspection of all GRP materials on site and report if any discrepancies found.
• Inspection and ensure availability of proper equipment and other related GRP installation tools and materials.
• Ensure fabrication of pipe work in accordance with Chevron specification and approved procedures.
• Check pipe work routing and supporting arrangements.
• Witness hydro testing of the pipe system and verify that it is in accordance with the project test specification.
• Present and ensure the correct alignment and make up of all flange connections.
• Sign all the joints records to confirm that the joints constructed are as per the approved procedure.
• Report all defects of GRP product found during handling or fabrication.
• Any deviation to procedure or defect of Pipe during jointing work been identified, record and report to DSME

Lead structural & piping Inspector

Confidential

Responsibilities:

• Arrange inspection plan for team
• Liaises with TPI, PMT and subcontractor to resolve any appearing problem
• GIIR (Goods Inwards Inspection Report and all prior to incoming of Material Fabrication).
• MVR (Material Verification Report) Visual to Acceptance standard, check of Mill and traceability, material marking as at cutting plan prior to cutting.
• Verified and inspect welding consumable prior to commencement of job.
• Perform Fit-up Inspection including dimension check prior to welding as per drawing and specification.
• Surveillance during welding to verify compliance with specification procedure including any pre heat, type of electrode, baking & holding oven, welding control and procedure.
• Visual Inspection of welding as per code and standard and arrangement of NDT as per specification requirement.
• Preparation of Final Documentation i.e. GIIR, MVR, Fit-up, Visual and Weld Summary Report.
• Verify material to comply as per specification, code and clients requirement
• Carry out inspection as per MVR, Fit-Up, Visual, Punch List and Line Walk
• Clarified and monitor NDT requirement as per spec and Code
• Line Checking base on Isometric Drawing, As-Build drawing and P&ID (Piping & Instrument Diagram) to ensure the entire additional joint and delete joint recorded, prior commencing hydro test.
• Prepare and Verified document for Hydro test Package as per package before Hydro Test.
• Reinstatement / pre inspection for metallic and GRE material

Structural/ architecture & piping Inspector

Confidential

Responsibilities:

• GIIR (Goods Inwards Inspection Report and all prior to incoming of Material Fabrication).
• Perform Welder Qualification Test (WQT) and Welding Procedure Qualification Test.
• MVR (Material Verification Report) Visual to Acceptance standard, check of Mill and traceability, material marking as at cutting plan prior to cutting.
• Verified and inspect welding consumable prior to commencement of job.
• Perform Fit-up Inspection including dimension check prior to welding as per drawing and specification.
• Surveillance during welding to verify compliance with specification procedure including any pre heat, type of electrode, baking & holding oven, welding control and procedure.
• Visual Inspection of weldment as per code and standard and arrangement of NDT as per specification requirement.
• Preparation of Final Documentation i.e. GIIR, MVR, Fit-up, Visual and Weld Summary Report.
• Perform and verification all material base on PTS ( Confidential Technical Specification) spec.
• Do final inspection for floor, ceiling, wall, door and window finishing
• Ensure the complete installation include finishing of material and equipment as per drawing and specification
• Create and clear punch list for all installation work
• Verified installation report
• Perform leak test and chalk test for door and window
• Performed grouting check since the cement mixing process. (sent some cement mixing to lab test)
• Control DC check for all floor leveling and ceiling by dumpy level and dc equipment

Construction coordinator

Confidential

Responsibilities:

• Interfaces with other Coordinators and Project Engineers to implement best practice construction methods and techniques for use on assigned projects
• Provides input to the overall construction execution plan including site layout, equipment, materials, and construction organization
• Assists in the development of a project construction equipment plan, method of statement, fabrication and erection sequence with Construction Manager
• Assists to develop project specific Construction Procedures and Instructions as required for implementation
• Execute and identify construction sequencing
• Organized and determined the layout of temporary facilities for modules erection
• Review and monitor all Procedure i.e. Project Specific Procedure, Project Planning, Fabrication Procedure, QC procedures, ITP and Quality Plan and assist with establishing acceptable Working practices for construction activities.
• Monitoring of Contractors site activities in accordance with the Projects and Contractors specifications, ITP and Quality Plans.
• Monitor delivery of materials, skid and others and ensure materials are compliant with project procedure
• Ensure all pre-construction activities such as welder qualification test, Factory Acceptance Test (FAT) been witnessed and approved as necessary.
• Maintain day-to-day liaison with Client, Contractors site PMT & QA/QC team.
• Review and record Contractors daily inspection report for welding and NDT activities
• Prepare daily summary reports of all site fabrication & erection activities performed.
• Surveillance and monitoring during Construction, Modification & Installation works on Project.
• Ensure and checked summary report for NDT report required such as Visual report, UT report, RT report & MPI report.
• Inspect all delivery material and item based on D.O and P.O.
• Update and monitoring all inspection report for record and traceability prepared by contractor
• Engaged with Confidential Carigali team for construction activities, HSE activities, quality activities.
• Review and check test package before hydrotest process been performed.
• Monitor & Verified Hydro test activity, from line check until hydro test package signing off.
• Review and Final check for As Build Drawing & Red Line Mark up.
• Complete Mechanical Check sheet to ensure the entire package are completed with pre-commissioning.
• Final Inspection for all item as per drawing requirement and standard.
• Verified Claim from contractor as per project progress claim.
• QC documentation review and report.
• Assist Documentation Control Clerk for Final Documentation.

Construction supervisor

Confidential

Responsibilities:

• Assist and involved the Project Management Team in planning the project
• Assist and Involved the Project Management Team in creating schedule for the construction project
• Supervise construction projects to make sure they meet technical specifications
• Ensure that construction projects are completed within planned cost and time
• Keep accurate records of material and labor costs incurred in the construction process
• Monitor the progress of the construction work and performance of subcontractors at the site
• Conduct meetings with site workers and subcontractors on behalf of the project manager
• Convey message from the site manager to subcontractors
• Convey information about the progress of the project and performance of the contractors to the site manager
• Present the progress report to Construction Manager and Project Planner
• Assist the project manager in the procurement of certain materials for inspection and detail part.
• Assist contractors and Their Engineers in interpreting technical designs
• Educate and train site workers on safety procedures to be adopted at the site and make sure that they adhere strictly to safety standards
• Conduct and organized safety toolbox briefing before job started every day.
• Short briefing for actual progress, today planning and ahead planning to subcontractor team after safety toolbox briefing
• Ensure that the construction site is safe and free from any hazardous chemical or objects
• Report accidents that occur at the construction site to the project manager
• Ensure the smooth day to day operation of work activities at the construction site
• Ensure all the fabrication and erection sequence are follow. Such as MVR, Fit up arrangement, DC Inspection, Fit-up Inspection, visual Inspection, NDT Inspection before proceed to the next step such as Hyrotesting and PWHT.
• Present weekly progress report to Construction Manager

Structural inspector

Confidential

Responsibilities:

• Request DC (Dimensional Check) before welding and after welding with DC surveyor
• Prepare Fit - Up Inspection & report before welding, dealing with MMHE QC Inspector
• Ensure that correct WPS & electrode are using before weld.
• Monitoring welding activities and ensure only qualified welder on board and following welding procedure.
• Visual Inspection before, during and after weld
• Prepare NDT request and review report - MPI, UT, RT
• Documentation control related to QA & QC / Inspection
• Compilations and tractability of welding joint no. and NDT before final inspection
• Review outstanding report such as NDT report and Inspection report.
• Coordinate with Eng. Dept, Project Management Team and Client report the project progress and activities to ensure the project requirement are following.

Structural Inspector

Confidential

Responsibilities:

• Performed in process inspection such as marking fit up, Visual and Dimension as per ITP (Inspection Test Plan)
• Request MVR (Material Verification Report) for all material prior cutting and fabrication as per drawing and specification.
• Request Dimensional Check before and after welding.
• Ensure proper execution of fabrication job.
• Monitoring welding activities and ensure only qualified welder on board and follow welding procedure.
• Monitoring on NDT activities and repairing activities.
• Meeting to clarify all outstanding documentation and punch list for welding and NDT.
• Carry out final visual and dimensional check (DC) to ensure all measurement is within tolerance prior to acceptance.
• Monitoring during/sub assembly and welding activities.
• Update and complete all inspection report for record and filling.
• Performing final punch list inspection on main component.