SUMMARY

• Microcontroller - based System Design (Embedded System design): 20 years’ experience.
• Microcontroller platforms: MC68HC12x/S12x, MC68HC08/S08x, MC68HC11, MPC55X, AT91SAM926x (ARM9 Core), TMS 320 DSP C2000 series, Infineon C167 Series, H8, Intel MCS-51 (ATMEL-C51), Intel MCS196, Microchip.
• Development Tools: CodeWarrior for HC12/S12x &HC08/S08x, Cosmic for HC11, Code Composer for TMS320, GNU Tool Chain for AT91SAM926x, TASKING for C17, IAR for H8, C18 for PIC18Fxx, asm51, C51, MPLAB for PIC18x
• Embedded Operating Systems/RTOS: Embedded Linux, WinCE, OSEK, Electronic Control Unit (ECU) configuration and Calibration Tools (ECCT) developed.
• Reliability/Quality Robustness E/E system design verification, Diagnostic analyzation vehicle multiplex systems, E.D.S electrical interface, Six Sigma design release.
• Strong experience wif FMEAs (Failure Mode and Effects Analysis)
• C/C++: (Level: expert, 15-year experience):
• Visual C++/MFC: (Level: Expert, 15-year experience). Including:
• Programming for Windows environment wif Microsoft Foundation Class (MFC).
• SDK program design (Level: Expert, 15-year experience).
• Assembly Language: x86 series microprocessor (Level: Expert, 10-years’ experience).
• Visual Basic: (Level: Very Good. 3-year experience)
• Matlab: (Level: Expert, 8 years) dSpace,ETAS (HiL)
• Simulink. (Level: Expert. 8 years)
• Visual SourceSafe: (2 years)
• LabVIEW code - 6.1-8.5 (7+years)
• Electronic System Design: (Level: Expert, 15 years experience)
• Digital circuit design: ISA and PCI bus based embedded PC boards.
• Analog circuit design: Sensor interface, Amplifier and filter design; A/D, D/A system design.
• Design tools: Protel, 0rCAD/Cadence, PCAD,Spice-type simulators,OP-Amps,DAC,ADC’S,PLL
• In-Vehicle Network (Level: Expert, 5 year experience)
• CAN (GMLAN, ISO15765, J1939), SAE-J1850, J2610, J1708, ISO 9141-2, KW2000, Single Wire CAN (J2411), LIN bus. J2534 standard.
• Program design for hand-hold PC: (Level: Expert, 5-year experience):
• Embedded Visual C++ SDK for WinCE. Crash Testing Data Acquisition, Impact Test Support and Data Validation, Task execute, Test Request, Validating Channels in Assignment, Validating Crashes, Accelerometers, Load Cells, Six Channel transducers, Neck Transducers, Simulated Accelerometers for Dummy Crash Test, Assisting and Directing Technicians managing new processes.
• C++ and Palm OS Developer Suite for Palm OS.
• Network & Communication: (Level: Expert. 15 years’ experience)
• Hardware/Software design for teh following communication systems: TCP/IP, RS-232/RS-485, USB.
• SPI, TWI/I2C.
• Wireless Network (Level: Expert. 2-year experience): IEEE802.15.4 protocol (ZigBee).
• Control system design: RF-Transmission and Antenna Propagation Signal Oscillations 3hz-30Ghz
• Digital Control System design, such as industry process control, motion control (DC motor, BLDC motor, AC motor). EHF- 30HZ-300GHZ Signal Oscillations Microwave data links, Advanced Weapons Systems, Advanced Scanning. AM RADIO amplitude modulation being teh process of amplification of teh Signal FM Radio Frequency is Modulated using a carrier signal information that is used in car Stereo Multiplexing and Demultiplexing process used in demodulation and modulated FM.

PROFESSIONAL EXPERIENCE:

Confidential, Dearborn, MI

Embedded Software Engineer

Responsibilities:

• Evaluate Electronic Control Unit (ECU) module circuitry
• Embedded Software programming/C-coding/Routines/Commands/Acknowledge.
• Check Automotive parts for durability
• Responsible for Validation activities on HIL
• dSpace, ETAS (HiL)
• Arduino Boards control code
• Test to evaluate standards on infotainment systems
• Created testing for infotainment systems
• Matlab: (Level: Expert, 8 years)
• Experience on Simulink
• Experience wif AUTOSAR ECU level authoring tools
• MSP (Powertrain Control Module Specifications
• Design a scale drawing in Microsoft Visio of all hardware components required to simulate teh actuators for all programs wif in a MSP
• Build of Material (BOM) list of all required components and lead teh build of teh HiL load tray wif internal and external resources
• Design wiring harness that mates to teh load tray
• Document load tray and wiring harness details in Microsoft Excel

Confidential, Detroit, MI

Embedded System/ DSP Engineer

Responsibilities:

• System Automation - Allen Bradley PLC for machine robotics’ insertion assembly equipment Laptop ladder logic programming assembly, conveyer checkout mass production Barcode technology performed on a specified number sequence failure purpose, sensors mounted on case, video camera installed to checkout barcode.
• Embedded Software programming/C-coding (Android Development)/Routines/Commands/Acknowledge.
• Electronic Control Unit (ECU) configuration and calibration tool (ECCT)
• Subsystem implementation and Design-ECU development and DV system and component creation/integration
• Reliability/Quality and customer concerns focus on improvement.
• National Instruments LabVIEW/FPGA Module create flexible user defined data acquisition (Dac) hardware/software design application
• Supporting System Performance and RF Engineers in evaluating and improving areas of poor coverage by identifying system performance problems.
• Leveraged existing automation and test plans to deliver test cases in a timely fashion.
• Created test documentations to ensure products will meet teh functional requirements and customer expectations.
• Design and develop specific antenna and RF component for automotive applications.
• Experience in development of AUTOSAR BSW module and BSW integration
• Compact Rio - programmable automation controller (PAC) combines embedded real-time and FPGA
• Technology to deliver ultra-high performance
• In-depth knowledge of RF testing standards, wireless technologies and devices, and standard testing methodologies
• UML-Unified Modeling Language
• Code Composer Studio
• Developing DSP Processor Families
• Board Level Testing
• Black Box Testing
• Hardware Validation
• CanBus Lin
• Automotive CAN Safety Systems

Confidential, Ford Powertrain, Detroit, MI

Embedded Engineer / Electrical Engineer

Responsibilities:

• Worked on vehicle wire harness installation for Lincoln Continental setup modules, sensors for seat belts.
• Ford/Visteon Corp. Prototype Buildup, EEC/EMC/ECU software validation and Wingcast Satellite transmission/Receivers Design and Coordination evaluation methods.
• Concerns, Report written in MSWord, MsExcel.
• Worked wif Embedded Control system.
• Worked on vehicles for High Voltage Safety.
• Matlab/Simulink - generate synthesizable HDL code from Simulink models and Stateflow charts.
• Stateflow coder generates C code from Stateflow charts.
• Developed and implemented DSP based filters (design and programming) for vibration amplifiers/filters used in vibrations based diagnostic setups used in aircraft engine and heavy equipment applications. This effort replaced analog based filters.
• Model based Calibration Toolbox-Calibrate complex powertrain systems.
• Seat setup interior testing Fix Turing, Fabrication, equipment maintenance, Data Acquisition, Test Monitoring, Durability Testing, Fatique, Stability, Tensile/Compression, FMVSS 202, Faro CMM, Pneumatics, Kuka Robots.
• Test Batteries for auto applications including Pba, Nimh, Lilon, Setup tests, Program cyclers, Prep Batteries connect them to test equipment, Monitor thermal chambers, Test Progress, and Data Logging, Download and Analyze data, Summarize and report to team leader.
• LabVIEW experience, Batterycell/Module testing, Maccor, Bitrode cyclers, Battery Pack testing exp. Aeroviroment cyclers, macros in excel (visual basic).

Confidential, Detroit, MI

Calibration Engineer

Responsibilities:

• Instrumentation and calibration used Pierburg Fuel Calibration Measurement.
• Determine teh volumetric flow rate. AVL Blow by Meter: Used Microprocessor controlled sensor unit wif IGTM-1000: Analog RPM adapter ignition timing meter Dyno - engine transmission evaluation analysis for front wheel drive, rear wheel drive, and four - wheel drive product sectors.
• Used AUTOSAR for to standardize software architecture for automotive electronic control units.
• Design transmissions to save weight and reduce complexity.
• Conducted root cause analysis for transmission failures Powertrain development continuously variable transmission (CVT).
• Testing and Software simulation. LabVIEW C++ 7.1
• Electronic Control Unit (ECU) configuration and development

Confidential

Source Tech

Responsibilities:

• Worked on radio circuit analysis, micro-processors, and voltage dividers.
• Windows 98 for computer, Visual c++, instrument panel evaluation.
• EMC, EMI, for shielding cable RS-232, for anti-static and electrical interference, control modules circuitry.
• Used excel, word, access and reporting analysis.
• Results, written communications.
• Reliability/Quality robustness E/E System design development, design verification (DV) Diagnostics vehicle multiplex systems compatibility, signal characteristics E.D.S electrical interface, engineering, manufacturing assembly. managering six sigma design release.
• Worked on Data Acquisition Systems for teh chassis Dynamometer used for Emission instrumentation and calibration.
• Calibrated Gould 4000 Chart recorders.
• Verification of teh recorder's accuracy at scheduled calibration periods.
• Took measurements utilizing teh NTK A/F Meter (Air Fuel) measurement system, based on teh measurement of teh partial pressure of oxygen (o2) in vehicle exhaust gas.
• Conducted calibration of load cells and accelerometers for dummy testing equipment.
• Worked wif six channel transducers, neck transducers and accelerometer block wif simulated accelerometers for dummy crash tests.
• Windows "95" and Microsoft excel was used for data acquisition.
• Air bag tests were performed in sled test instrumentation setup in teh erect seated position.
• Teh data acquisition system, including transducers must conform to teh specification of SAE.
• Conducted: calibration and test methods measurement traceability, dynamometer control.
• During teh calibration responsible for making sure teh Speed current, torque, or combination were accurately controlled by use of suitable input circuits.
• Followed QS9000 and ISO9000, IS09001 instrumentation, calibration standards.
• Setup conversion output report digital and analog channels read from computer each channel high range and low range millivot readings.
• PCM and Modac units’ communication Jordan, Modicon PLC, PLC safety program.

Confidential

Jr. Engineer

Responsibilities:

• Worked on design application - software and hardware for teh Lincoln Continental automobile circuitry.
• Proposed hardware modification to run window motor circuitry, and door motor circuitry, seat belt presenter actuation (for manual operation) and rest actuator circuitry, read digital and analog schematics, actuator logic, occupancy sensors, and arm rest relays dpdt.
• Troubleshoot circuitry for prototype car including modules.
• Utilized Microsoft Excel 5.0, MS Dos 6.0, assembly language, word perfect 5.1, microcontroller 80c51 family, autocad, orcad, design programmable microprocessors.
• Worked on Data acquisition, for L-series/cargo vehicle engineering.
• Conducted product analysis, product development, design analysis, road simulation testing, MTS shaker system, multi-station interlock controller.
• Technical concerns written for design section engineers for evaluation approval.
• Wrote up new concerns, design launch, open concerns and preferences for Ford.
• Conducted reiterations, resolutions, durability vehicle status reports.
• Followed teh QS9000 and IS09000, IS09001 instrumentation, calibration standards.
• Utilized; Microsoft Word 6.0/Word Perfect 5.1, Microsoft Excel 5.0, MS 0056.0 Microsoft Excel 4.0, Ladder logic system programming, working knowledge of spc/sqc. PowerPoint 4.0, Microsoft access 2.0.
• Built teh prototype; cruise control engineering and demonstration purposes for GM’s legal staff when lawsuits occurred regarding teh cruise control device in their vehicles.
• Conducted performance Analysis; Product Analysis and design for demonstration kit circuitry.
• Utilized Microsoft Word, Word Perfect 5.1, Microsoft Excel, MS Dos 5.0 for circuit analysis; Video Camera; Video Cassette recordings for engineering and legal staff including validation of vehicle performance and safety.
• Worked on component upgrade for Data Logger software.
• Exchanged and updated teh integrated circuit for teh microcontroller.
• Used teh Data Logger to analyze all of teh cars statistical performance data in order evaluate their vehicles performance levels.
• Teh information I gather from teh Data Logger was directly used as teh standard information for Fords protocol on all vehicles.