Network Engineer Resume
New York, NY
SUMMARY
- Over Five years of professional experience, in Implementation, Administration, Operations and Troubleshooting of enterprise data networks as a Network Engineer.
- Work experiences on Cisco Switches, Cisco Routers, Load Balancers & Cisco Firewalls.
- Experience in LAN/WAN setup, installation, configuration and troubleshooting.
- Profound knowledge on various WAN technologies like E1/T1/E3/T3, HDLC, Frame - Relay and PPP.
- Knowledge in WAN technologies including T1, T3, ISDN, HDLC, Point to Point, Frame Relay.
- Experience in Physical cabling, IP addressing, Wide Area Network configurations (Frame-relay & MPLS), Routing protocol configurations (RIP, EIGRP, OSPF, BGP).
- Well Experienced in configuring protocols HSRP, GLBP, VRRP, ICMP, PPP, PAP, CHAP, and SNMP. Configured RIP, EIGRP, OSPF.
- Proficient experience in the configuration of Cisco Catalyst 2900, 2960, 3560, 3750, 4500, 4900, Legacy Cat 6500 series, Nexus 7010, 5548 and 2248 switches.
- Experience working with 2800, 2900, 3800, 3900, 7200, 7600 series Cisco Routers.
- Hands on experience in troubleshooting of inter-VLAN routing and VLAN Trunking using 802.1Q. Implementation of gateway redundancy with HSRP and GLBP.
- Expertise in the implementation of Layer 2 technologies including VLAN’s, VTP, STP, RSTP, Trunking and Port-security, expertise on working with Ether channel technologies (LACP, PAGP).
- Experience with setting up Cisco ASA firewalls Cisco ASA 5510, Cisco ASA 5512 & Cisco ASA 5505 with restricted security policies, NAT implantation, configured DMZ interfaces to restrict traffic flow.
- Experience with configuring, maintaining and troubleshooting Checkpoint firewalls.
- Experience in configuring and troubleshooting NAT and PAT.
- Expertise in configuration and deployment of routing protocols like OSPF, EIGRP, BGP, Policy-based routing over Cisco Routers, configuration and troubleshooting of route redistribution.
- Experience in configuring and troubleshooting the Cisco 2500, 8500, 5500 series wireless controllers.
- Implementation of traffic filters using Standard and Extended access-lists, Distributed-Lists, Route Maps and route manipulation using Offset-lists.
- Managed inventory of all network hardware, Management and Monitoring using SSH, Syslog, SNMP and NTP.
- Comprehensive expertise in implementation, analysis, optimization, troubleshooting and documentation of LAN/WAN networking systems.
- Highly motivated with the ability to work independently or as integral part of a team and committed to the highest levels of professionalism.
TECHNICAL SKILLS
Routers: Cisco 7600, 7200, 3800, 3600, 2900, 2800, 2600, 2500 series.
Routing: OSPF, EIGRP, BGP, RIP v1/v2, PBR, Route Filtering, Redistribution, Summarization, and Static Routing.
Switches: Nexus 7K/5K/2K, Cisco Catalyst 6500, 4500, 3850, 3560, 3750, 2960.
Switching: LAN, VTP, STP, PVST+, RPVST+, Inter VLAN routing & Multi-Layer Switch, Ether channels.
Firewall: ASA Firewall (5505/5510), Cisco ASA.
Security Protocols: IKE, IPSEC, SSL-VPN.
LAN Technologies: Port-channel, VLANS, VTP, STP, RSTP, 802.1Q.
WAN Technologies: Frame Relay, ISDN, ATM, MPLS, leased lines & exposure to PPP, T1 / T3.
Networking Protocols: LACP, MPLS, HSRP, VRRP, GLBP, TACACS+, Radius, AAA.
Features & Services: IOS and Features, SNMP, SYSLOG, DHCP, CDP, TFTP, FTP.
Network Management: Wireshark, SNMP, Net flow Analyzer, Syslog.
Languages: C, C++.
PROFESSIONAL EXPERIENCE
Confidential, New York, NY
Network Engineer
Responsibilities:
- Experience in configuring Site-to-Site and remote access VPN solutions.
- Configuring the FortiGate firewall and FortiAuthenticator.
- Installed and configured Cisco 7200 series router and Cisco 2950, 4500, 6500 Series switches.
- Configured network using routing protocols such as RIP, OSPF and BGP and troubleshooting L2/L3 issues.
- Worked on multiple projects related to Branch networks, Campus networks, extranet clients and Data Center Environments involving in data center migrations from one data center to another.
- Provided estimated bandwidth requirements for data replication, to best determine adequate timing for migration service levels.
- Created data migration strategies to help with completion of migration of data center from one point to another.
- Configuration of Cisco 6500, 4500 & 3750 Catalyst switches for network access.
- Worked on Cisco Firewalls ASA 5500(5510/5540) Series.
- Configuring VLAN, Spanning tree, VSTP, SNMP on EX series switches.
- Time to time upgrade network connectivity between branch office and regional office with multiple link paths and routers running HSRP, EIGRP in unequal cost load balancing to build resilient network.
- Design and implement Catalyst/ASA Firewall Service Module for various LAN’s.
- Key contribution includes troubleshooting of complex LAN/WAN infrastructure that include routing protocols EIGRP, OSPF & BGP.
- Configured Client VPN and RSA Token ID technologies including Cisco’s VPN client via IPSEC.
- Configuring ACL to allow only authorized users to access the servers.
- Participated in on call support in troubleshooting the configuration and installation issues.
- Installation, maintenance, troubleshooting local and Wide Areas Network (ISDN, Frame relay, DDR, NAT, DHCP, TCP/IP).
- Provided technical support in terms of upgrading, improving and expanding the network.
- Providing technical security proposals, installing and configuring ASA firewalls, VPN networks and redesigning customer security architectures.
Environment: /Platform: Cisco 3750/3550/3500/2960 switches and Cisco 3640/1200/7200/3845/3600/2800 routers, Cisco ASA5510, Checkpoint, Cisco Nexus7K/5K, Cisco ASA.
Confidential, Ohio
Network Security Engineer
Responsibilities:
- Responsible for the configuration of Cisco Routers (7000, 5300, 4000, 2500, 3000, 2600) using RIP, OSPF, EIGRP, BGP.
- Managed office network with Cisco devices with network devices including 2500 and 3600 series routers and 3500, 2900, 1900 series switches.
- Analyzed and resolved a high percentage of initial customer contact in the areas of PC/LAN.
- Dealt with customer problems to management and support groups utilizing standard escalation model.
- Extensive experience in configuring and implementing OSPF and BGP.
- Supported core network consisting of Cisco 7200 series routers running multi area OSPF.
- Configured EIGRP and OSPF as interior gateway protocol with route filtering and route redistribution, installed and maintained Cisco 3600, 2600 and 7200 backbone routes with HSRP.
- Implemented stub/Totally stub areas and various OSPF features like route-summarization and SPF throttling.
- Configured Security policies including NAT, PAT, VPN, Route-maps and Access Control Lists.
- Implemented Cisco Secure Access Control Server (ACS 3.0) for TACACS+/RADIUS.
- Knowledge with redistribution of routing protocols and Frame-Relay configuration.
- Handled Network Migration from RIP to OSPF.
- Implementation of TCP/IP and related Services-DHCP/ DNS.
- Configured, maintained and troubleshot routing protocols such as OSPF, EIGRP and BGP.
- Engaged in office moves, helped in identifying network requirements of new building, installed new networking hardware, and coordinated with vendors for cabling/wiring.
- Performed troubleshooting, while maintaining trouble ticket tracking, following both internal/external routes.
- Assisted with escalation procedures and customer notifications.
- Configured Cisco Routers for OSPF, RIPv2, EIGRP, Static and default route.
- Acted as Tier 3 support for connectivity, failures, configuration, implementation, and troubleshooting.
Environment: /Platform: Cisco 3750/3550/3500/2960 switches and Cisco 3640/7200/3845/3600/2800 routers, Checkpoint, OSPF, BGP, VLAN, HSRP, LAN, WAN, IPV4, AS Firewall, Checkpoint, Nexus 7K/5K/2K.
Confidential, Kent, OH
Teaching Assistant
Responsibilities:
- As an assistant configured hardware and software, setting up peripherals such as printers, routers, learning and technical equipment.
- Identifying technical problems and debugged hardware and software related to LANs/ WANs.
- Strategies include operating systems, virus protection, mail systems and Internet services.
- Updated the anti-virus, spam blockers, and other security software so that the systems are always secured.
- Resolved all computer related problems, monitored and maintained system functionality and reliability by identifying ways to prevent system failures.
- Switching related tasks included implementing VLANS, VTP and configuring ISL trunk on Fast - Ethernet channel between switches.
Confidential, San Diego, CA.
Network Engineer
Responsibilities:
- Configured Routing protocols such as RIP, OSPF, EIGRP, static routing and policy based routing.
- Team member of Configuration ofCisco7206 router with VPN and Configuration of Catalyst switches.
- Configuration 7500, 7200 with OSPF and catalyst 6505, 4500, 3550 switches with various VLAN.
- Create and testCisco router and switching operations using OSPF routing protocol, ASA 5500 Firewalls, and MPLS switching for stable VPNs.
- Troubleshooting the Network Routing protocols (BGP, EIGRP and RIP) during the Migrations and new client connections.
- Configuration and troubleshooting link state protocols like OSPF in single area and multiple areas.
- Redesign of Internet connectivity infrastructure for meeting bandwidth requirements.
- Configured and managed VLANs, 802.1Q Trunk, RPVST+, Inter-VLAN routing, HSRP and LAN security for Layer-2 and Layer-3 switching domains as per the organization’s requirement plan.
- Optimized performance of the WANnetworkconsisting of Cisco 3550/4500/6500 switches by configuring VLANs.
- Configured VLANs with 802.1q tagging. Configured Trunk groups, ether channels, and Spanning tree for creating Access/distribution and core layer switching architecture.
- Configured BPDU Guard, port-fast, uplink fast and other spanning tree features.
- Configuration and troubleshooting of Cisco 2500, 2600, 3000, 6500, 7500, 7200 Series routers.
- Strong working knowledge of Nexus 5K/7K /2K.
- Deploying Layer 2 security in Server Farms by configuring switch for 802.1x port based authentication.
- Implemented, configured BGP WAN routing, converting OSPF routes to BGP (OSPF in local routing).
- Technical assistance for LAN/WAN management and complex customer issues.
- Provided support for troubleshooting and resolving Customer and user reported issues.
- Worked with Network Engineer’s in the installation and configuration of firewalls.
- Responsible for network evaluations, troubleshooting a variety of network problems, and implementing various software and hardware upgrades efficient performance.
- Designed and implemented DMZ for Web servers, Mail servers & FTP Servers using Cisco ASA5500 Firewalls.
- Provided redundancy to the network, implemented hot standby routing protocol (HSRP) and Load sharing for effective utilization of routers.
- Configuring, implementing and troubleshooting VLAN’s, VTP, STP, Trunking, Ether channels.
- Involved in monitoringnetworktraffic and its diagnosis using performance tools likeSnort.
- Expertise in maintenance of layer2 switching tasks which advocate VLAN, VTP, STP, RSTP, PVST, RPVST, configuring of ether channel with LACP and PAGP along with troubleshooting of inter-VLAN routing.
- Implementing, configuring, and troubleshooting various routing protocols like RIP, EIGRP, OSPF, and BGP etc.
- Performing network monitoring, providing analysis using tools like Wireshark.
Environment: /Platform: Nexus 2K/5K/7K, Cisco ASA 5500, LAN, WAN, HSRP, RIP, OSPF, BGP, EIGRP, VLAN, MPLS, STP, RSTP.
Confidential, CA
Network Engineer
Responsibilities:
- Migration of RIP V2 to OSPF, BGP routing protocols.
- Configured EIGRP for Lab Environment.
- Cisco routing and switching technologies and devices LAN/ WAN, VPN, Routing protocols, VLANs, Trunking, Cabling, IOS administration
- Implemented ISL and 802.1Q for communicating through VTP.
- Experience with Cisco IOS and NS-OS.
- Configuring Port Mirroring, VLAN, SMTP, STP, RSTP, SNMP, and Routing Policies on switches.
- Working with Client teams to find out requirements for their Network Requirements.
- Installed and Configured DNS server and Checkpoint Firewall with IPS feature in Internet Edge.
- Designing solutions for frozen requirements using Cisco Routers and Switches.
- Deploying the network infrastructure to meet the requirements.
- Dynamic routing protocol configuration (RIP, RIP V2).
- Troubleshooting network problems and working knowledge of HTTP, SNMP, HTTPS, SMTP, DNS, DHCP, etc.
- Implementation & trouble shooting of complex WAN, LAN, VLANS, private VLANS, high availability solutions like HSRP, VRRP, GLBP, ether channels, site- to- site VPN(IPSEC), access control lists, NAT, PAT, routing solutions etc.
- Maintaining all the network devices routers, firewall, switches.
- Incorporated VLANS to segment traffic on managed switches.
- Installing service pack upgrades.
- Use of TCP Dump to troubleshoot access issues.
- Configuring VRRP, Static route, BGP, Routing policies, ACL.
- Implemented Secure Remote VPN for high speed remote access.
- Managed network connectivity between Head offices and Branch office.
- Responsible for Internal and external accounts and, managing LAN/WAN and coordinating with the system/Network administrator during any major changes and implementation.
Environment: /Platform: Cisco routers 1900 and switches 2960, Nexus 7K/5K, 802.1Q, LAN/WAN, VLANS, NAT, PAT, ACL, VRRP, EIGRP, VPN technology.
Confidential
Jr. System Administrator
Responsibilities:
- Providing day-to-day technical support to employees for network infrastructure and internal desktop systems software and hardware.
- Performing general maintenance tasks and resolves less complex problems in timely manner and reporting complex issues to a higher level of support.
- Installing, configuring and troubleshooting desktop systems, workstations, servers and network.
- Maintaining passwords, data integrity and file system security for the desktop environment.
- Communicating highly technical information to both technical and nontechnical personnel.
- Recommending hardware and software solutions, including new acquisitions and upgrades.
- Upgrading IOS, troubleshootingnetworkoutages.
- Develop and implement strategies to support the current and future needs of the company.
- Configured Cisco Routers 2600 series using RIP, OSPF, and EIGRP.
- Configured Cisco Switches 2900 series.
- Troubleshoot and document issues involving Windows desktops, laptops, LAN/WAN, routers, switches, printers and other hardware and software components.
Environment: /Platform: Windows, Linux, Routers, Switches, LAN/WAN, RIP, OSPF, EIGRP.