CAREER OBJECTIVE:

• To obtain a position that will enable me to utilize my skills in diamond core drilling.

Summary of qualifications:

• A diamond drill operator with experience in operating variety of drill rigs to drill core samples for testing and exploration.
• Knowledge of useful tools and machines including there make-up and maintenance.
• Ability to watch gauges and other indicators to make sure the machine is working properly.
• Ability to communicate both orally and in writing.
• Capable in listening to sounds of machine, understand and carry out necessary function.

CAREER SKILLS:

• Knowledge of safety rules and guidelines involved with each operation of the job (Safety management.)
• Capable in the operation of diamond drill rig such as:
  LM 55
  LM 75
  HANJIN 4000(KOREAN RIG)
  ID 500 (HELI-RIG)
  CORTECH 1300
  UDR 200
  UDR 600

• Working knowledge of welding and metal fabrication.
• Maintain a valid driver's license for light vehicles.

TRAININGS AND SEMINARS:

Name of Company: Confidential
Course:First Aid Online Workbook
Duration: July 13, 2012

Name of Company: Confidential
Course:Shield Metal Arc Welding (SMAW) NCII
Duration: August, 2009 to October 2009

Name of Company: Confidential 
Course: Skid Steer Loader
Duration: May 16, 2008 

Name of Company: Confidential
Course: Certificate II in Engineering MEM 20105
Duration: November 18, 20008 to December 18, 2008

Name of Company: Confidential
Course: Drive, and Recover a 4WD Vehicle
Duration: October 9, 2008 to October 9, 2008

Name of Company: Confidential.
Course: Certificate II in Drilling - Mineral Exploration
Duration: May 21, 2007 to May 25, 2007

Name of Company: Confidential

Course: Basic First Aid
Duration: July 14, 2007 to July 15, 2007
Name of Company: Confidential
Course: Portable Fire Equipment Protection
Duration: July 10, 2007

Name of Company: Confidential.
Course: Certificate II in Engineering MEM 20105
Duration: November 18, 20008 to December 18, 2008

Name of Company: Confidential
Course: Basic First Aid
Duration: August 3-5, 2006

Name of Company: Confidential
Course: Occupational Safety and Health Training
Duration: February 6-7, 2006

EMPLOYMENT History:

Name of Company: Confidential
Duration: July 2012to Present
Position: Driller
Job Description:

Name of Company: Confidential
Duration: Nov 2011 to July 2012
Position: Driller
Job Description:

Perform pre start checks diligently every start of shift. Service rig as stipulated in Preventive Maintenance Manual. Set the rig up in a safe and effective manner, so as to obtain an accurate sample as specified by the Client. Extend stabilizing jack screws to support and level drill rig. Listen to sound of machine to determine changes in rock formation being penetrated. Provide the Client with core samples safely and cost efficiently. Maintain a clean, hazard Free State on drill site and work area. Communicate all relevant information to crew members promptly. Maintain record of footage drilled. Report to Supervisor every end of shift. Ensure everyone understand that nothing takes priority over safety.

Name of Company: Confidential
Duration: June 2011 to Nov. 2011
Position: Driller
Job Description:

Dismantle all rig parts for air lift using helicopter. Assemble all rig parts and prepare bed logs for drilling rig. Extend stabilizing jackscrews to support and level drill rig. Core orientation every run with Esy Mark. Hole survey using reflex camera. Assist and train offsiders in performing their task safely and efficiently. Ensure all safety checks are carried out when specified. Perform maintenance with my capabilities and qualifications on rig and equipment to keep it in a safe working order. Operate the rig in a manner so as not to endanger myself or another person involve in the day to day running of the operation. Ensure core sample meets Client specification.

Name of Company: Confidential
Duration: September 2009 to April 2010
Position: Driller
Job Description:

Report to Supervisor on any outstanding points from checklist. Liaise with cross shift. Set the rig up and prepare drilling tools and equipment in a safe and efficient manner. Connect fuses, wires and detonating cords to explosive cartridges and detonators. Prepare and position explosives in bore holes and priming explosives using detonators and explosives. Drill boles holes. Blast holes every end of shift. Assist offsider with manual handling task.

Name of Company: Confidential
Duration: February 2009 to August 2009
Position: Driller
Job Description:

Pin sides of drill rig to secure it from moving when drilling. Start and control drilling action and lowering of casing into drill hole. Withdraw core tube from hole and extract cores from inner tube. Present core samples in a manner acceptable to Client. Ensure vehicles are maintained in a clean, hazard Free State. Communicate with crew to ensure task are completed safely, in a time and cost efficient manner. Keep accurate records of fuels, oils and consumables used. Eliminate work related injuries, damage to equipment and lost time through accidents. Apply housekeeping program to maintain a safe working environment

Name of Company: Confidential 
Duration: May 2007 to December 2008
Position: Driller
Job Description:

Position track mounted rig at drilling site specified on field map. Examine operation of mud pump to ensure circulation and consistency of drilling fluid. Observe pressure gauge and move control to regulate speed. Withdraw inner tube and extract core out of it. Strong work ethics with a focus on achieving daily procedures. Maintain camp and living quarters in a clean, hygienic condition. Operate rig in a manner that conforms to Major Drilling performance targets, policies and procedures. Communicate regularly with Supervisor to establish requirements/task are completed and that the job runs safely, smoothly and without unnecessary delays. Predict requirements, provisions and control spares in a cost effective manner. Demonstrate commitment to safety by complying personally with all safety rules and regulations.

Name of Company: Confidential 
Duration: June, 2005 to April 2007
Position: Trainee Driller
Job Description:

Position drill rig at drill site specified on field map. Pin sides of drill rig to secure it from moving when drilling using rig pin. Pour water into mud pump and mix and test drilling fluids to cool drill bit and to remove cuttings out of the hole. Examine operation of mud pump to ensure circulation and consistency of drilling fluid. Listen to sound of drilling machine to determine changes in rock formation being drilled. Hole survey every thirty meters. Changes drill bit as needed.

Educational Background:

TERTIARY:
Name of Institution: Confidential 
Course: Bachelor of Science in Mechanical Engineering
Duration: June 1986 to March 1991 (Undergraduate)

SECONDARY:
Name of Institution: Confidential
Location: Lepanto Mankayan, Benguet, Philippines
Duration: June 1982 to March 1986

PERSONAL INFORMATION:

Date of Birth: November 9, 1968
Gender: Male
Citizenship: Filipino
Civil Status: Married
Height: 5 ft. 3 in.
Weight: 150 lbs.
Religion: Christianity