SUMMARY:

• Performed visual condition assessments, preparing reports for various types of electrical systems.
• Inspected new and existing sound and security systems, wiring, lighting, motors, and generating equipment.
• Inspected wiring installation for heating and air - conditioning systems, appliances, and other components.
• Kept records and making daily reports of deficiencies found during the inspection.
• Inspected for deficiencies in switchboards, power panels, lighting of all types and switchgear.
• Inspected electrical systems and devices for proper listings, and insures that all systems are installed in compliance with listing requirements and electrical Fire and Life Safety standards.
• Examined the effectiveness of on-site electrical systems, fixtures and fire monitoring electronic systems.
• Made all necessary adjustments to ensure proper operation of all residential lighting and power systems.
• Managed repairs through related mechanical, electrical, and electronic system schematics analyses.
• Proficient in the use of Autodesk AutoCAD 3D and Solid Works 2012 in the design of the electrical and electronic systems components.
• Experienced and proficient in the use of ammeters, voltmeters, ohmmeters, and other test equipment.
• Experienced in reading electrical blueprints, schematics and wiring diagrams.
• Performed maintenance and repairs on various radio and alarm systems.
• Performed preventive and corrective maintenance on various three-phase 450 volt, 4000 amp or more power systems, the installation of new equipment, additions and alterations.
• Expert in the preventive and corrective electrical maintenance on motors, generators, and controllers and related power generation equipment.
• Independently calibrated all electronic test equipment used for troubleshooting and repair.
• Knowledgeable with the operation and maintenance of PLC’s and electrical relays.

PROFESSIONAL EXPERIENCE:

Commissioning Engineer/Data Center Specialist

Confidential

Responsibilities:

• Assisted with the commissioning of all electrical critical systems equipment, including but are not limited to UPS, SCC, ATS, PDU, transformers, switchgear, breakers and related power distribution systems.
• Responsibilities included the design, implementation and documentation of data center commissioning programs and procedures to verify data center facility systems work as intended as per the bases of design.
• Ensured data center operated at maximum efficiency, including analyzing existing operating conditions, recommending new technologies and improving overall efficiency, and cost reduction.
• Developed/organized O&M documentation to serve as a reference for data center electrical and mechanical equipment.
• Manages systems to avoid unplanned customer impacting outages to data center infrastructure.
• Ensured environmental and safety standards are consistently met, identifying problems and making repairs quickly in emergency situations and abnormal conditions.
• Commissioned battery power supply, HVAC, electrical distribution and control systems related to the critical operating data center environment.
• Implemented continuous improvement to minimize environmental impact of the operation by helping improve site power effectiveness and operational efficiency.

Electrical Engineer/Inspector

Confidential

Responsibilities:

• Examined various types of electrical systems and equipment.
• Inspected new and existing sound and security systems, wiring, lighting, motors, and generating equipment.
• Inspected the installation of the electrical wiring for heating and air-conditioning systems, appliances, and other components.
• Tasked with keeping records and making daily reports of deficiencies found during the inspection.
• Reported unsafe conditions onsite to the local government agency.
• Inspected for deficiencies in switchboards, motor control switches, service switches, power panels, lighting of all types and switchgear.
• Inspected electrical systems and devices for proper listings, and insures that all systems are installed in compliance with listing requirements and electrical Fire and Life Safety standards.
• Examines the effectiveness of onsite electrical systems, fixtures, operating equipment and fire monitoring electronic systems.

Field Service Specialist

Confidential

Responsibilities:

• Performed control valve assembly and reconstruction to conduct service and repairs such as rebuilding, re-packing and replacement, reading and interpreting mechanical prints, understanding principles and components of steam, hot water, chilled water and HVAC distribution and basic controls.
• Configured, Calibrated, and Documented the accuracy of flowmeters, pressure indicators, temperature indicators, control and solenoid valves, and other recording or indicating instruments to ensure reliable plant operations.
• Performed various instrument calibrations using the appropriate procedures, properly documented all work done and has maintain this documentation in accordance with applicable regulations.
• Modified instruments/systems to improve the performance and/or function of the local heating, ventilation and air conditioning control systems.
• Troubleshoot and repaired instrumented systems on an emergency and routine basis.
• Knowledgeable in the system operation of solenoids and lockup relay instrumentation.

Field Service Engineer

Confidential

Responsibilities:

• Maintaining, repairing and commissioning the PW Swift Pac FT 8 gas turbine package that offers 30 or 60 megawatts of power.
• Configuring gas generator gas generator power turbines that are optimized for general power generation at 3000 or 3600 RPM and mechanical drive at 5500 RPM nominal speed.
• Investigation, troubleshooting and resolution of issues that occur on shop floor processes that effect product quality, yield cost and performance.
• Commissioned, maintained and repaired Swift Pac gas turbine generator packages that offered greater than 41 percent simple cycle efficiency and a nominal 60 to 120 megawatts within a modular design using aero-derivative technology.
• Analyses and interpretation of metallurgical testing results and their impact on repair methods and techniques for PWPS gas generators and power turbines and associated systems in power applications.
• Understand electrical and mechanical components, schematics and configurations associated with gas turbine systems in power generation plants.
• Support new systems and equipment by providing online and in service support throughout the world.
• Knowledgeable of Woodward Governor, Allen Bradley and Siemens Control Systems associated with PWPS, GE and Rolls Royce gas turbine generator power systems.

Electronics Technician

Confidential

Responsibilities:

• Safely performed duties to include, but not limited to, install, configure, test, calibrate, operate, troubleshoot, maintain and inspect transmitters, pressure and level controllers.
• Troubleshoot and repair analyzers, AC motor starters, VFD’s, control circuits, and PLC operations.
• Responsible for installation and maintenance of electrical, electronic and pneumatic components on compressor units, generator control panels and units, pump units, ignition systems and air fuel ration systems.
• Performed maintenance on substation control circuits and relay panels.
• Proficient in the safe and efficient operation of electrical relays and associated circuits and control systems.
• Read and interpret drawings, schematics, sketches and specs in order to make recommendations for proposed installations and completed projects.
• Make recommendations for improvement, replacement and additions of instrumentation and electronic equipment required for safe and continued operation, including cost estimates.
• Schedule and perform preventive maintenance, accurately recording all maintenance and repair of equipment.
• Inspected existing panels to insure proper function and application.
• Assisted in control system start-ups, commissioning, designs and reviews.
• Assisted in creating departmental procedures and insures that all I&E staff are trained properly.
• Stayed current on all new equipment and technical trends in electronics, communication and automation systems and equipment.

Field Support Technician

Confidential

Responsibilities:

• Provided support for PLC control systems, hydraulics, engines, pumps, 25 KVA diesel generators and all associated equipment on oil and gas drilling rigs.
• Implemented the development and debugging of Siemens SL7-300 PLC, Allen-Bradley RSLogix, ABB controls and variable frequency drive systems.
• Performed PLC programming as needed for the installation, maintenance, and repair of electronic circuitry.
• Lead and participated in the construction, installation, modification, maintenance and repair of drilling rig systems, facilities and related electronic controls and devices by interpreting blueprints, manufacturer’s specifications and written as well as verbal instructions.
• Diagnosed malfunctioning systems, apparatus, and components through the use of test equipment and hand tools to locate the cause of failure.
• Performed field service maintenance and repair on capital machinery with pneumatics, hydraulics, AC/DC motor controls, and PLC’s and servo systems.

Electronic Technician

Confidential

Responsibilities:

• Performed inspection, repair, adjustment and removal of instrument and controls equipment and wiring.
• Maintained, troubleshoots and writes minimal programming changes for PLC’s and field system controls.
• Responsible for continuously maintaining the lines of production by specifically fine tuning electrical and electronic equipment maintaining and increasing output.
• Maintains repairs and calibrate electronic equipment and control systems.
• Performed tasks associated with the test and repair of electrical and electronic equipment.
• Continuously inspects equipment and evaluates their designed performance.
• Maintains and troubleshoots AC drives and variable frequency drives.
• Responsible for the instillation, testing, repair, calibration, inspection and maintenance of instrumentation systems on the field associated with the process of hydraulic fracturing and oilfield process equipment.
• Maintained and repaired mechanical, hydraulic and pneumatic oil and gas field machinery.
• Prepares maintenance reports by collecting, analyzing and summarizing information and trends.

Field Service Technician

Confidential

Responsibilities:

• Maintained the safe and successful operation of elevators, escalators, railway swing bridges and power walks of the New York City subway system.
• Managed all trouble calls and maintenance updates for the real time status of operating equipment.
• Repaired and maintained thirty-five hydraulic and traction elevators within the New York City Transit system.
• Maintained, installed, and repaired station elevator safety devices, and door operators.
• Ensured the proper operations of elevator door reopening devices, stop key switches, operating control/leveling devices, car emergency alarm/communication and car/hoist way doors.
• Made all necessary adjustments and replacements to ensure proper operation of elevator motor control panels.
• Managed the maintenance and inspection of elevator hydraulic and traction control units.
• Ensured the proper operation of the elevator and escalator remote monitoring system.
• Managed repairs through related mechanical, electrical, and electronic system schematics analyses.

Locomotive Electrical Technician

Confidential

Responsibilities:

• Worked in the design of the electrical and electronic components and emergency use electro-mechanical diesel locomotive based on customer specifications and standards.
• Helped design and test of the J1939 communication system for diesel locomotive systems.
• Tested the development of Confidential Controls for Confidential prototype with Confidential .
• Performed the installation of Siemens electric power inverters.
• Performed tests on interior communication and buzzer signal systems.
• Performed maintenance and testing on illuminated signal indicator systems.

Electrical Technician

Confidential

Responsibilities:

• Made test equipment setup and hardware installations. Calibrated all electronic test equipment used for troubleshooting and repair. Maintained and repaired radio frequency support electric systems.
• Installed and re-engineered electrical power systems, and soldered circuit boards for power supplies saving the organization $580,000 in repair cost.
• Interpreted electrical schematics and diagrams and repaired various electrical and electronic systems.
• Supervised and trained over fifty electricians in troubleshooting electrical support equipment, solid state electronic, and special frequency controls and also power supply systems.
• Inspected repairs done on various electrical power systems to maintain quality assurance.
• Experienced in troubleshooting of computer control systems, hardware and peripherals.
• Performed corrective and preventive maintenance on power and lighting circuits, control switches, fuse panels, and electrical distribution systems.
• Experienced and proficient in the use of ammeters, voltmeters, ohmmeters, and other test equipment.
• Experienced in reading electrical blueprints, schematics, and wiring diagrams.
• Repaired and maintained electro-optical systems to include night vision equipment and forward looking infra-red systems.
• Performed preventive and corrective maintenance on various three-phase 450 volt, 4000 amp or more power systems, the installation of new equipment, additions, and alterations.
• Knowledgeable in Windows NT, Microsoft Works, Microsoft Office Excel, Microsoft Office PowerPoint, Microsoft Outlook 2003, and Microsoft Word.
• Expert in the preventive and corrective electrical maintenance on motors, generators, controllers and related power generation equipment. Knowledgeable in liquid cell and dry cell electrical battery maintenance and back-up systems.
• Managed and performed communication and electrical cable installation, repair, and maintenance.